Does the use of universal adhesive systems improve the durability of the bond strength of orthodontic brackets to enamel?

Background: Universal adhesive systems used for restorative clinical procedures are like orthodontics and may be a viable option. This study evaluated the effectiveness of universal adhesive systems in enhancing the durability of the shear bond strength (SBS) and adhesive remnant index (ARI) of orthodontic brackets to enamel. Material and Methods: 100 bovine incisors were divided into five groups (n=20), according to the applied adhesive systems: Primer Transbond XT; Ambar; Ambar Universal; Single Bond Universal; Adper Single Bond 2. Bracket from each tooth were submitted to SBS test after 24 hours, and 12 months later. The amount of remaining adhesive was evaluated through ARI. Results: After 24 hours, there was no difference in BS between the control and the other groups (p>0.05). However, there were difference between TOTALETCHING1 group and the Ambar Universal (p=0.015) and Single Bond Universal groups (p=0.011). After 12 months, Primer Transbond XT, Ambar, Ambar Universal and Adper Single Bond 2 showed no differences in the SBS (p>0.05). Nonetheless, Single Bond Universal presented superior result when compared to Primer Transbond XT (p=0.046) and Ambar (p=0.011) groups. The SBS of all groups reduced significantly after 12 months (p<0.05). There was no difference between ARI scores in each individually assessed group (p>0.05), for both periods. Following 24 hours, a difference was observed between the groups (p=0.043), fact that didn't occur after 12 months (p=0.109). Conclusions: Adhesive systems, such as Ambar Universal and Single Bond Universal are efficient in bonding orthodontic brackets to enamel when associated with Transbond XT adhesive paste. Key words:Bond strength; Primer Transbond XT, orthodontic brackets, adhesive systems.

Deep occlusal carious lesions clinical management by Brazilian dentists: a nationwide e-survey / Manejo clínico de lesões cariosas oclusais profundas por cirurgiões-dentistas brasileiros: uma pesquisa eletrônica nacional

Objective: To investigate the clinical management of deep occlusal carious lesions in permanent teeth by Brazilian dentists. Material and Methods: This cross-sectional study included a sample of 732 Brazilian dentists who responded to an electronic questionnaire composed of 20 questions addressing socio-demographic information, training and professional activity characteristics, and clinical management of deep carious lesions. Descriptive analysis was performed, considering relative and absolute frequencies and 95% confidence intervals. The association between the dentists' variables of interest (age group, type of higher education institution, years in practice, highest academic degree completed and main sector of professional activity) and the mean number of incorrect answers regarding deep carious lesions management was analyzed by Analysis of Variance (ANOVA), followed by the Bonferroni post-test (p<0.005). Results: Stepwise removal was the strategy pointed out by most dentists (42.8%). However, 16% of the dentists selected nonselective carious tissue removal. Furthermore, 45.6% of the dentists disagreed with maintaining carious tissue over the pulp in deep lesions with a risk of pulpal exposure. When using instruments to remove carious dentine, 17% of the dentists chose a diamond burn while 13% preferred tungsten carbide burs. Dentists who graduated from public institutions had a lower mean of non-conservative decisions than those from private institutions. Dentists with master's or doctoral degrees were more conservative, as well as dentists from public service compared to those from the private sector. Conclusion: The dissemination of conservative approaches in the management of deep carious lesions needs to be strengthened and increasingly based on updated scientific literature.(AU)

Objetivo: Investigar o manejo clínico de lesões cariosas oclusais profundas em dentes permanentes por cirurgiões-dentistas brasileiros. Material e Métodos: Este estudo transversal incluiu uma amostra de 732 dentistas brasileiros que responderam a um questionário eletrônico composto por 20 questões abordando informações sociodemográficas, formação, características da atividade profissional e manejo clínico de lesões cariosas profundas. Foi realizada análise descritiva, considerando frequências relativas e absolutas, e intervalos de confiança de 95%. A associação entre as variáveis de interesse (faixa etária, tipo de instituição de ensino superior, anos de prática, maior titulação acadêmica concluída e principal setor de atividade profissional) dos cirurgiões-dentistas e a média de acertos no manejo de lesões cariosas profundas foi analisada pela Análise de Variância (ANOVA), seguida do pós-teste de Bonferroni (p<0,005). Resultados: A remoção seletiva foi a estratégia apontada pela maioria dos cirurgiões-dentistas (42,8%). No entanto, 16% dos dentistas selecionaram a remoção não seletiva do tecido cariado. Além disso, 45,6% dos dentistas discordaram da manutenção de tecido cariado sobre a polpa em lesões profundas com risco de exposição pulpar. Ao usar instrumentos para remover a dentina cariada, 17% dos dentistas escolheram uma broca diamantada, enquanto 13% preferiram brocas de carboneto de tungstênio. Cirurgiões-dentistas formados em instituições públicas apresentaram menor média de decisões não conservadoras do que os de instituições privadas. Os cirurgiões-dentistas com mestrado ou doutorado foram mais conservadores, assim como os cirurgiões-dentistas do serviço público em relação aos do setor privado. Conclusão: A disseminação de abordagens conservadoras no manejo de lesões cariosas profundas precisa ser fortalecida e cada vez mais baseada em literatura científica atualizada (AU)

Dual-cured adhesive system improves adhesive properties of dentin cavities restored with a bulk-fill resin composite

Aim: To evaluate the impact of a dual-cured adhesive system on the in situ degree of conversion (DC), bond strength (BS) and failure mode (FM) of adhesive interfaces in dentin cavities restored with a bulk-fill resin composite. Methods: 4-mm-deep dentin cavities with a 3.1 C-factor were created in 68 bovine incisors (n = 17 per group). The lightcured (Scotchbond™ Universal) or the dual-cured (Adper™ Scotchbond™ Multi-purpose Plus) adhesive system was applied to the cavities, which were then restored with a bulkfill resin composite (Filtek™ Bulk Fill). In situ DC analysis was performed by means of micro Raman spectroscopy at the top and bottom interfaces. Push-out BS was measured in a universal testing machine after 24-h or 6-month water storage. FM was determined with a stereomicroscope. Data of in situ DC and BS were analyzed by two-way analysis of variance (ANOVA) and Tukey test (p<0.05), while the FM was analyzed descriptively. Results: The groups that received the dual-cured adhesive system showed statistically higher in situ DC and BS than those that received the light-cured adhesive system. Cohesive failure mode was the most frequent in all conditions. Conclusion: In situ DC and BS were influenced by the curing strategies of the adhesive systems with better performance of the dual-cured material

Cashew nut shell liquids: Antimicrobial compounds in prevention and control of the oral biofilms.

OBJECTIVE: The aim was to evaluate the antibacterial and antibiofilm activity of natural (n-CNSL) and technical (t-CNSL) cashew nut shell liquid against streptococci and enterococci related to dental caries and chronic apical periodontitis, respectively. MATERIAL AND METHODS: Minimum inhibitory concentrations (MIC) and minimal bactericidal concentration (MBC) were determined to assess the antimicrobial effect of both CNSLs (n-CSNL and t-CNSL) against S. oralis ATCC 10557, S. sobrinus ATCC 6715, S. parasanguinis ATCC 903, S. mutans UA 159 and E. faecalis ATCC 19433. The antibiofilm activity was evaluated by total biomass quantification, colony forming unit (CFU) counting and scanning electron microscopy (SEM). Furthermore, cytotoxic effect of the substances was evaluated on L929 and HaCat cell lines by MTS assay. RESULTS: The n-CNSL and t-CNSL showed inhibitory and bactericidal effect against all strains tested in this study, with MIC and MBC values ranging from 1.5 to 25 µg/mL. Overall, both CNSLs showed significant reduction in biomass quantification and enumeration of biofilm-entrapped cells for the strains analyzed, in biofilm formation and preformed biofilms (p < 0.05). In biofilm inhibition assay, the t-CNSL and n-CNSL showed reduction in biomass and CFU number for all bacteria, except in cell viability of S. parasanguinis treated with t-CNSL (p > 0.05). Indeed, SEM images showed a reduction in the amount of biomass, bacterial cells and changes in cellular morphology of S. mutans. CONCLUSION: In conclusion, both substances showed effective antibacterial and antibiofilm activity against the strains used in the study, except in viability of S. parasanguinis cells treated with t-CNSL.

Physicochemical and microbiological assessment of a dental adhesive doped with cashew nut shell liquid.

To evaluate i) the inhibitory and bactericidal activity of cashew nut shell liquid (CNSL) and its isolated compounds (anacardic acid and cardol) against oral bacteria; ii) the biofilm formation inhibition, resin-dentin bond strength and physicochemical properties of a dental adhesive incorporated with these substances. The antibacterial effect of CNSL, anacardic acid, and cardol were assessed by determining the minimum inhibitory (MIC) and minimum bactericidal (MBC) concentrations. Effect in inhibiting biofilm formation of the adhesive incorporated with the substances (15 µg/ml) against a mixed-species biofilm of Streptococcus mutans and Candida Albicans and was determined by direct contact test. Additional Analysis included microtensile bond strength (µTBS) test, elastic modulus (EM), flexural strength (FS), degree of conversion (DC), water sorption (WS) and solubility (SL). The data were submitted to statistical analysis by one-way ANOVA and Tukey's test (p < 0.05). CNSL, anacardic acid and cardol showed antibacterial activity for all strains tested, with MIC and MBC values ranging from 3.12 to 25 µg/ml. There was no growth of colonies forming units in the adhesives incorporated with the substances. EM increased in the adhesive incorporated with anacardic acid, decreased after incorporation of cardol and it was not affected by incorporation of CNSL. The substances tested showed no effect in FS, DC, WS, SL and µTBS. In conclusion, the CNSL, anacardic acid and cardol showed antibacterial effects against oral bacteria and, the incorporation of substances did not reduce the performance of the adhesive.

3D Printing of Microgel-Loaded Modular Microcages as Instructive Scaffolds for Tissue Engineering.

Biomaterial scaffolds have served as the foundation of tissue engineering and regenerative medicine. However, scaffold systems are often difficult to scale in size or shape in order to fit defect-specific dimensions, and thus provide only limited spatiotemporal control of therapeutic delivery and host tissue responses. Here, a lithography-based 3D printing strategy is used to fabricate a novel miniaturized modular microcage scaffold system, which can be assembled and scaled manually with ease. Scalability is based on an intuitive concept of stacking modules, like conventional toy interlocking plastic blocks, allowing for literally thousands of potential geometric configurations, and without the need for specialized equipment. Moreover, the modular hollow-microcage design allows each unit to be loaded with biologic cargo of different compositions, thus enabling controllable and easy patterning of therapeutics within the material in 3D. In summary, the concept of miniaturized microcage designs with such straight-forward assembly and scalability, as well as controllable loading properties, is a flexible platform that can be extended to a wide range of materials for improved biological performance.

Two-year clinical evaluation of a proanthocyanidins-based primer in non-carious cervical lesions: A double-blind randomized clinical trial.

OBJECTIVES: This double-blind randomized clinical trial evaluated the influence of pre-treatment with proanthocyanidins (PA) from grape seed extract on the clinical behavior of a simplified etch-and-rinse adhesive placed in non-carious cervical lesions (NCCLs) over 6- and 24-months. MATERIALS AND METHODS: A total of 135 restorations were randomly inserted in 45 subjects. The NCCLs were etched with 37 % phosphoric acid for 15 s and distributed into 3 groups: Control (PA0) - adhesive ExciTE F applied as per the manufacturer's recommendations; PA2 and PA5 groups - 2 wt% and 5 wt% PA solution, respectively, were applied for 60 s and washed for 30 s prior to application of the adhesive. The resin composite was placed incrementally and light-cured. The restorations were evaluated at baseline, 6 months (6 m) and 24 months (24 m) using both the FDI and USPHS criteria. Statistical analyses were carried out using Friedman repeated-measures analysis of variance by rank and the Wilcoxon test (α = 0.05). RESULTS: The retention rates were 98 % (PA0), 98 % (PA2) and 83 % (PA5) after 6 m and 93 % (PA0), 89 % (PA2) and 70 % (PA5) after 24 m. Only PA5 resulted in a significant lower retention rate at 6 m and at 24 m compared with that of baseline (p = 0.03). All groups resulted in a significantly worse marginal adaptation and marginal staining for the FDI criteria when the baseline vs. the 24 m recall data were compared. These differences were considered clinically acceptable under the FDI criteria. CONCLUSIONS: The application of PA as a primer did not result in clinical advantages after 24 m of clinical service, regardless of the concentration used. CLINICAL RELEVANCE: It has been reported that PA, a collagen crosslinking agent, increases the durability of the dentin-resin interface. However, no effects were found clinically after 24 months.

Saliva contamination effects at different application steps on bond strength of total etch two-step adhesive / Efeitos da contaminação por saliva em diferentes etapas de aplicação do sistema adesivo convencional de dois passos na resistência de união de restaurações adesivas

Introduction: there are clinical situations in the management of cavities favorable to saliva contamination. Human saliva is a complex mixture of oral fluids and it has been showed that the protein content of the saliva is responsible for the decrease in adhesive bond strength when contamination has occurred. Objective: this study aimed to evaluate the effect of saliva contamination during different steps of application of adhesive system on bond strength of total etch two-step adhesive system. Methods: twenty-five extracted human molars were ground flat to expose occlusal dentin. The bonding system and composite resins were applied to the dentin after etching step under five conditions (n=5/group): G1: control group­no contamination; G2: etching/ contamination/dry/adhesive system application; G3: etching/contamination/wash/dry/adhesive system application; G4: etching/adhesive system application/contamination/wash/dry/adhesive system re-application; and G5: etching/adhesive system application/contamination/dry. Microtensile bond strength was tested after specimens were stored in distilled water at 37ºC for 24h. Data (mean values -µTBS) were analyzed by ANOVA one-way and Tukey tests (α=5%), respectively. Results: Groups G2, G3 and G4 revealed bond strength similar to the control (G1). Group G5 showed significantly lower bond strengths than other groups (p<0.001). Conclusion: the total etch two-step adhesive tolerated salivary contamination except when the contamination occurred after application of the bond and it was only removed with an air jet and adhesive system was not reapplied.

Introdução: a saliva humana é uma mistura complexa de fluidos orais e tem sido demonstrado que o conteúdo proteico da saliva é responsável pela diminuição da resistência adesiva quando ocorre contaminação. Objetivo: este estudo objetivou avaliar o efeito da contaminação salivar durante diferentes etapas de aplicação do sistema adesivo sobre a resistência de união. Métodos: vinte e cinco molares humanos extraídos foram cortados para exposição da dentina oclusal. O sistema adesivo convencional e as resinas compostas foram aplicados na dentina após a etapa de condicionamento sob cinco condições (n = 5 / grupo): G1: grupo controle - sem contaminação; G2: condicionamento ácido/contaminação/secagem/adesivo; G3: condicionamento ácido/contaminação/lavagem/secagem/adesivo; G4: condicionamento ácido/aplicação do sistema adesivo/contaminação/lavagem/secagem/reaplicação do sistema adesivo; e G5: condicionamento ácido/aplicação do sistema adesivo/contaminação/secagem. A resistência à microtração foi testada após o armazenamento das amostras em água destilada a 37ºC por 24 horas. Os dados (valores médios -µTBS) foram analisados por ANOVA unidirecional e testes de Tukey (α = 5%), respectivamente. Resultados: Os grupos G2, G3 e G4 revelaram resistência de união semelhante ao controle (G1). O grupo G5 apresentou resistência de união significativamente menor que os demais grupos (p <0,001). Conclusão: o adesivo convencional de dois passos não foi afetado pela contaminação salivar, exceto quando a contaminação ocorreu após a aplicação adesiva e foi removida apenas com jato de ar e o sistema adesivo não foi reaplicado.

Two-year clinical evaluation of proanthocyanidins added to a two-step etch-and-rinse adhesive.

OBJECTIVE: To compare the clinical behavior of Proanthocyanidins (PA)-free and PA-containing two-step etch-and-rinse adhesive used underneath resin composite restorations in non-carious cervical lesions (NCCLs) over a 6- (6 M) and 24-month (24 M) period. METHODS: 135 restorations were randomly placed in 45 subjects. The NCCLs were conditioned (37% phosphoric acid for 15 s) and distributed into 3 groups: Control (EX0) - ExciTE F (Ivoclar Vivadent) adhesive applied following the manufacturer's recommendations; EX2 and EX5 - 2 wt% and 5 wt% of PA were added to ExciTE F, respectively, and applied as in EX0. Resin composite was placed incrementally and light-cured. The restorations were evaluated at baseline, 6 M and 24 M, using FDI and USPHS criteria. Statistical analyses were performed using Friedman and Wilcoxon tests (α = 0.05). RESULTS: The retention rates were 98% (95% confidence interval 88-99%) for EX0, 92% (80-97%) for EX2; and 85% (72-93%) for EX5 at 6 M. A significant difference was found only for EX5 at 6 M when compared with the respective baseline findings (p = 0.03) and when compared with EX0 and EX2 (p = 0.001) at 6 M. After 24 M, the retention rates were 98% (88-99%) for EX0, 73% (59-84%) for EX2, and 71% (56-82%) for EX5. Only EX0 did not result in significant difference in retention rate at 24 M when compared with baseline but showed a significant higher retention rate when compared with those of EX2 and EX5 (p = 0.001). CONCLUSION: Adding proanthocyanidins to the adhesive solution jeopardized the retention of composite resins restorations in non-carious cervical lesions after 24 months. CLINICAL RELEVANCE: In spite of being user-friendlier than when used separately, the incorporation of proanthocyanidins into the adhesive solution impairs the longevity of composite restorations.